We manufacture an adapter that
allows you to connect the LEE
Perfect Powder measure
directly to your favorite progressive
or single stage reloading
press.

Our Perfect Rifle Adapter and
sleeves are made from top quality
6061 aluminum insert to ensure
years of Perfect Reloads!

LEE'S Rifle Charging Die Adapter
(# 90194) is limited to cartridges
up to .308 Win in case length.

Our adapter comes with 2 sleeves.
Accommodates most all calibers
from .218 ~ 45-70

Perfect Powder Measure
(Around $21)
► Eliminates cut powder, jerky
action and drum binding.
► Micrometer adjustments.
Quick and easy.
► Throws charges from 2 grains
to over 100 grains!
► Easily change powders / hoppers.
► Perfect for developing loads.

This is a very ecomonical alternative to the Dillon's Quick Change, RCBS Uni-Flow Powder Measure, Lyman #55 Powder measure, or the Lee Universal Charging Die.

Click here to check out
our Perfect Adapter

 
Perfect Rifle Adapter shown with two sleeves, .223, 45-70, 338 Win Mag, and 7mm STW cartridge cases.

The top end is threaded to connect to the LEE Perfect Powder measure. The bottom is threaded with standard 7/8 14 thread that will mount into all standard reloading presses (Lee, Dillon, RCBS, Hornady, etc.)

Having the powder measure attached to your turret press makes charging cases must faster because you do not need to remove the case from the shell holder. 

Works great on most all calibers from .218 ~  45-70 with widths under .52"

Will not accommodate larger cases such as 300 Ultra Mag and Short and Super Short Magnum.

Comes with (2) powder sleeves (as shown above).
One for calibers .218 ~ .243 and a larger sleeve for .270 and larger calbers.

Works very well with larger stick / spherical rifle powder like 4895 and 4350.

   
Includes a LEE Lock Ring Nut with Rubber O-Ring.

The LEE Perfect Powder Measure is not included.